Cladding Installation

Cladding Installation

Cladding Repair and Replacement

Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.

Free Cladding Installation quote

No obligation. We only use your details to reply about this job.

Cladding Repair and Replacement — Cladding Installation

What's involved

Most cladding problems come from poor installation rather than bad materials. Common faults include boards fixed directly to the wall with no cavity, missing insect mesh, mild steel nails causing black streaks, boards too close to the ground and no gaps around windows for drainage. The specialist removes affected boards, inspects the battens and membrane behind, and replaces anything rotten or torn. Where the original detailing is wrong, a partial or full re-clad may be the only lasting fix. Small repairs of a few boards can often be done in half a day, but matching weathered timber is difficult, so new boards may stand out until they silver. If storm damage is involved, take photos before any work starts, as your home insurer may need them.

How we handle it

  1. Send photos and measurements

    Use our quote form to describe the walls you want clad, the rough area in square metres, the material you like and whether there is existing cladding to remove. Photos of each elevation help the installer price accurately.

  2. Survey and material advice

    A local cladding specialist visits to check the wall construction, damp proof course height, window reveals, boundaries and access. They explain fire performance, maintenance and cost differences between timber, composite and fibre cement.

  3. Quote and ordering

    You receive a written quote listing the boards, battens, membrane, fixings, trims, scaffolding and waste removal. Once accepted, materials are ordered, which typically takes one to three weeks depending on the product.

  4. Preparation and installation

    Scaffold or towers go up, the wall is prepared, membrane and battens are fixed, then boards are installed from the bottom up with ventilation gaps, insect mesh and trims around openings.

  5. Finishing and handover

    The installer fits final trims, cleans down, removes offcuts and walks you round the work. You receive maintenance guidance and any manufacturer warranty details for the boards that were used.

Price guide

Cladding is priced per square metre of wall, plus extras for access, removal of old material and detailing around windows and corners. Material choice makes the biggest difference: thermally modified timber and larch sit at the lower end, while cedar, fibre cement panels and standing seam metal cost more. These are typical UK guide prices for 2026, fitted.

  • Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
  • Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.
  • Western red cedar cladding, supplied and fitted: £110–£180 per m². Premium appearance and stability; grade and profile affect the price significantly.

Questions about cladding repair and replacement

How much does cladding cost per square metre in the UK?

Fitted exterior cladding typically costs £70 to £180 per square metre in the UK in 2026, depending on the material. Larch and thermally modified timber sit around £70 to £120, composite and fibre cement around £85 to £160, and cedar up to £180. Standing seam metal costs £180 to £320. Scaffolding, removal of old finishes and complex detailing are extra.

What is the best cladding for a house?

The best cladding depends on budget, maintenance and fire requirements. Fibre cement is durable, colour-stable and non-combustible or limited combustibility. Larch and cedar look natural but need care if you want to keep the original colour. Composite is low maintenance but usually combustible. For walls close to a boundary or on taller homes, a non-combustible board is often required.

How long does timber cladding last?

Well-installed larch or cedar cladding commonly lasts 30 to 40 years or more, and thermally modified timber has a similar service life when detailed correctly. Longevity depends far more on installation than species. A ventilated cavity, stainless fixings, boards kept off the ground and good drainage details stop the timber from staying wet, which is what causes rot.

Get a free cladding installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote