Cladding Installation
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.

What's involved
Metal cladding gives a sharp, architectural finish and is non-combustible. Standing seam systems in zinc, aluminium or coated steel are formed into long trays with raised seams, fixed with concealed clips onto plywood sheathing or a rail system over a membrane. Profiled steel sheets are common on agricultural and commercial buildings, while composite insulated panels are used on industrial units. Metal moves with temperature, so fixings must allow sliding, and dissimilar metals must be kept apart to avoid corrosion. Zinc needs a ventilated or structured underlay because moisture trapped beneath it can cause corrosion from the back. Lead times on folded trays and flashings are typically two to four weeks. Installation needs specialist folding tools and experience, so ask to see previous standing seam work before appointing anyone.
How we handle it
Send photos and measurements
Use our quote form to describe the walls you want clad, the rough area in square metres, the material you like and whether there is existing cladding to remove. Photos of each elevation help the installer price accurately.
Survey and material advice
A local cladding specialist visits to check the wall construction, damp proof course height, window reveals, boundaries and access. They explain fire performance, maintenance and cost differences between timber, composite and fibre cement.
Quote and ordering
You receive a written quote listing the boards, battens, membrane, fixings, trims, scaffolding and waste removal. Once accepted, materials are ordered, which typically takes one to three weeks depending on the product.
Preparation and installation
Scaffold or towers go up, the wall is prepared, membrane and battens are fixed, then boards are installed from the bottom up with ventilation gaps, insect mesh and trims around openings.
Finishing and handover
The installer fits final trims, cleans down, removes offcuts and walks you round the work. You receive maintenance guidance and any manufacturer warranty details for the boards that were used.
Price guide
Cladding is priced per square metre of wall, plus extras for access, removal of old material and detailing around windows and corners. Material choice makes the biggest difference: thermally modified timber and larch sit at the lower end, while cedar, fibre cement panels and standing seam metal cost more. These are typical UK guide prices for 2026, fitted.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
- Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.
Questions about metal cladding
How much does cladding cost per square metre in the UK?
Fitted exterior cladding typically costs £70 to £180 per square metre in the UK in 2026, depending on the material. Larch and thermally modified timber sit around £70 to £120, composite and fibre cement around £85 to £160, and cedar up to £180. Standing seam metal costs £180 to £320. Scaffolding, removal of old finishes and complex detailing are extra.
What is the best cladding for a house?
The best cladding depends on budget, maintenance and fire requirements. Fibre cement is durable, colour-stable and non-combustible or limited combustibility. Larch and cedar look natural but need care if you want to keep the original colour. Composite is low maintenance but usually combustible. For walls close to a boundary or on taller homes, a non-combustible board is often required.
How long does timber cladding last?
Well-installed larch or cedar cladding commonly lasts 30 to 40 years or more, and thermally modified timber has a similar service life when detailed correctly. Longevity depends far more on installation than species. A ventilated cavity, stainless fixings, boards kept off the ground and good drainage details stop the timber from staying wet, which is what causes rot.
Other services
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Metal Cladding near you
Get a free cladding installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote