Cladding Installation

Cladding Installation

Fibre Cement Cladding

Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.

Free Cladding Installation quote

No obligation. We only use your details to reply about this job.

Fibre Cement Cladding — Cladding Installation

What's involved

Fibre cement cladding is made from cement, cellulose fibres and mineral fillers, pressed into planks that mimic painted weatherboard or into large flat panels for a contemporary look. It does not rot, is not eaten by insects and is usually rated A2-s1,d0 for fire, which makes it a common choice near boundaries and on taller homes. Planks are face-nailed or secret-fixed onto treated battens over a breather membrane, while panels are typically fixed to aluminium rails with visible rivets or adhesive systems. Installers cut it with dust-extracted saws and wear respiratory protection because the dust contains silica. A typical detached house elevation takes three to five days. Pre-finished boards come in dozens of colours and need little more than a wash every year or two.

How we handle it

  1. Send photos and measurements

    Use our quote form to describe the walls you want clad, the rough area in square metres, the material you like and whether there is existing cladding to remove. Photos of each elevation help the installer price accurately.

  2. Survey and material advice

    A local cladding specialist visits to check the wall construction, damp proof course height, window reveals, boundaries and access. They explain fire performance, maintenance and cost differences between timber, composite and fibre cement.

  3. Quote and ordering

    You receive a written quote listing the boards, battens, membrane, fixings, trims, scaffolding and waste removal. Once accepted, materials are ordered, which typically takes one to three weeks depending on the product.

  4. Preparation and installation

    Scaffold or towers go up, the wall is prepared, membrane and battens are fixed, then boards are installed from the bottom up with ventilation gaps, insect mesh and trims around openings.

  5. Finishing and handover

    The installer fits final trims, cleans down, removes offcuts and walks you round the work. You receive maintenance guidance and any manufacturer warranty details for the boards that were used.

Price guide

Cladding is priced per square metre of wall, plus extras for access, removal of old material and detailing around windows and corners. Material choice makes the biggest difference: thermally modified timber and larch sit at the lower end, while cedar, fibre cement panels and standing seam metal cost more. These are typical UK guide prices for 2026, fitted.

  • Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
  • Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
  • Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.

Questions about fibre cement cladding

How much does cladding cost per square metre in the UK?

Fitted exterior cladding typically costs £70 to £180 per square metre in the UK in 2026, depending on the material. Larch and thermally modified timber sit around £70 to £120, composite and fibre cement around £85 to £160, and cedar up to £180. Standing seam metal costs £180 to £320. Scaffolding, removal of old finishes and complex detailing are extra.

What is the best cladding for a house?

The best cladding depends on budget, maintenance and fire requirements. Fibre cement is durable, colour-stable and non-combustible or limited combustibility. Larch and cedar look natural but need care if you want to keep the original colour. Composite is low maintenance but usually combustible. For walls close to a boundary or on taller homes, a non-combustible board is often required.

How long does timber cladding last?

Well-installed larch or cedar cladding commonly lasts 30 to 40 years or more, and thermally modified timber has a similar service life when detailed correctly. Longevity depends far more on installation than species. A ventilated cavity, stainless fixings, boards kept off the ground and good drainage details stop the timber from staying wet, which is what causes rot.

Get a free cladding installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote