South Ayrshire · Scotland
Cladding Installation in Ayr
Planning to clad your home in Ayr? We arrange timber, composite and fibre cement cladding through vetted installers working across South Ayrshire.
Ayr and the surrounding area
We cover all of Ayr and the wider South Ayrshire area. Jobs here are mostly in the KA7, KA8 and KA6 postcode areas. We also take jobs in Prestwick, Joppa and Dalrymple.
Working in Ayr
In Scotland, building warrants are issued by the local council, and much of the older stock is stone-built with harling or render. Period homes in Ayr often have decorative brickwork worth keeping, so cladding is usually limited to rear extensions or later additions. Holiday lets in Ayr benefit from low-maintenance fibre cement or composite cladding that stays smart between seasons with minimal upkeep. Scottish larch is grown and milled in Scotland and is a popular, durable cladding choice for homes and steadings around Ayr.
Garden offices are popular across suburban Ayr, and many owners re-clad cheap shiplap with thermally modified timber or composite after a few years. Pebbledash and dated render on homes around Ayr can be covered with cladding on battens, but the wall must be sound and dry first.
Our services in Ayr
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Guide prices for Ayr
- Garden office re-clad (around 3m by 4m): from £1,800. Strip, new membrane and battens, thermally modified timber and trims for a typical small building.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
Prices are a guide. Your quote for Ayr is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Ayr
Will timber cladding weather in Ayr?
Yes, untreated larch and cedar on homes in Ayr will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
Do you cover cladding repairs in Ayr and Kilmarnock?
Yes, our specialists repair storm-damaged, split or rotten cladding across Ayr, Kilmarnock and the wider area. They check the battens and membrane behind before replacing boards, so the underlying cause is fixed too.
Can cladding cover pebbledash in Ayr?
Yes, as long as the wall underneath is sound and dry. Installers in Ayr fix battens through the pebbledash into the masonry, leaving a ventilated cavity behind the new boards. Loose or hollow render should be removed first.
How soon can a cladding installer visit in Ayr?
Surveys in Ayr and nearby Irvine can often be arranged within a week or two. Installation then depends on material lead times, which typically run one to three weeks, and on the weather.
Is composite cladding better than timber?
Composite cladding is better if you want minimal maintenance and consistent colour, while timber is better for a natural look and lower environmental impact. Composite does not need oiling and resists rot, but it expands more with heat and is usually combustible. Timber weathers and may need treatment, yet it can be repaired board by board and is often cheaper.
Is cladding allowed close to a boundary?
Combustible cladding is restricted on walls close to a boundary, typically within one metre, under Approved Document B in England. In these locations installers usually recommend fibre cement or metal cladding with a high fire classification. Building control can confirm the requirement for your project, and the installer should check this before quoting for timber or composite.
Helpful guides
Do You Need Planning Permission for Cladding? UK Rules Explained
In England, cladding a house is often permitted development if the materials are similar in appearance to the existing house. In…
Read the guide →How Is External Cladding Installed? Battens, Membranes and Fixings
External cladding is installed by fixing a breather membrane to the wall or sheathing, then treated battens to create a ventilated cavity,…
Read the guide →Get a free cladding installation quote in Ayr
Tell us what you need and we'll come back with a clear price.
Request a quote