Kent · South East
Cladding Installation in Gravesend
Cladding installation across Kent starts with the right material choice. Local specialists in Gravesend can talk you through the options.
Gravesend and the surrounding area
Gravesend is in the Kent council area in the South East. Postcodes we cover here include DA12, DA11 and SG11. The same team covers Northfleet, Ebbsfleet Valley, Chadwell St Mary, Tilbury and Gravesham too.
Working in Gravesend
Semi-detached homes around Gravesend are often clad on the upper storey or around a front bay, giving a modern look without changing the brick below. Garden offices are popular across suburban Gravesend, and many owners re-clad cheap shiplap with thermally modified timber or composite after a few years.
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. New-build estates around Gravesend can have covenants restricting changes to the front elevation, so check your deeds before cladding.
Our services in Gravesend
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Guide prices for Gravesend
- Larch or Douglas fir cladding, supplied and fitted: £70–£120 per m². Includes membrane, treated battens, stainless fixings and standard trims on accessible walls.
- Garden office re-clad (around 3m by 4m): from £1,800. Strip, new membrane and battens, thermally modified timber and trims for a typical small building.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
Prices are a guide. Your quote for Gravesend is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Gravesend
How much does cladding cost in Gravesend?
Fitted cladding in Gravesend usually costs £70 to £180 per square metre depending on the material, plus scaffolding and removal of any existing finish. Fibre cement and composite sit mid-range, while cedar and standing seam metal cost more. Send photos and rough measurements for an itemised local quote.
Will timber cladding weather in Gravesend?
Yes, untreated larch and cedar on homes in Gravesend will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
How soon can a cladding installer visit in Gravesend?
Surveys in Gravesend and nearby Swanscombe can often be arranged within a week or two. Installation then depends on material lead times, which typically run one to three weeks, and on the weather.
Do I need planning permission for cladding in Gravesend?
It depends on where your home is. Many houses in Gravesend can be clad under permitted development, but conservation areas and protected landscapes usually need planning permission from Kent. Your installer can flag likely issues, but always confirm with the planning department.
Is composite cladding better than timber?
Composite cladding is better if you want minimal maintenance and consistent colour, while timber is better for a natural look and lower environmental impact. Composite does not need oiling and resists rot, but it expands more with heat and is usually combustible. Timber weathers and may need treatment, yet it can be repaired board by board and is often cheaper.
Is cladding allowed close to a boundary?
Combustible cladding is restricted on walls close to a boundary, typically within one metre, under Approved Document B in England. In these locations installers usually recommend fibre cement or metal cladding with a high fire classification. Building control can confirm the requirement for your project, and the installer should check this before quoting for timber or composite.
Helpful guides
Do You Need Planning Permission for Cladding? UK Rules Explained
In England, cladding a house is often permitted development if the materials are similar in appearance to the existing house. In…
Read the guide →Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →Get a free cladding installation quote in Gravesend
Tell us what you need and we'll come back with a clear price.
Request a quote