Guide · Homeowners · 3 min read · Updated 17 November 2026
Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Short answer
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds its colour with almost no maintenance but costs more and can look less natural. Fibre cement is rot-proof, colour-stable and non-combustible or of limited combustibility, which makes it the safest choice near boundaries. The best option depends on your budget, building and upkeep tolerance.
Side-by-side comparison
Each material has a clear personality. Timber is warm, varied and changes with age. Composite is uniform and stays looking new. Fibre cement sits between them, offering painted-board looks with masonry-like durability. The table below summarises the key differences using typical supplied-and-fitted prices.
Lifespans depend heavily on installation quality, exposure and maintenance, so treat them as broad guides rather than promises. A well-detailed, ventilated installation will outlast a poorly fitted one of any material.
| Factor | Timber | Composite | Fibre cement |
|---|---|---|---|
| Typical price per m² | £70–£180 | £90–£160 | £85–£150 |
| Appearance | Natural grain, weathers grey | Uniform, wood-effect | Smooth or textured painted look |
| Maintenance | Low if left to weather, more if coated | Occasional wash | Occasional wash |
| Fire performance | Combustible | Usually combustible | Non-combustible or limited combustibility |
| Rot risk | Depends on species and detailing | None | None |
| Environmental | Renewable, low embodied carbon | Mixed plastic and wood fibre | Cement-based, higher embodied carbon |
Timber cladding
Larch, Douglas fir, western red cedar and thermally modified softwoods are the most common timber cladding choices in the UK. Larch and Douglas fir are dense, affordable and naturally durable in their heartwood, making them popular for barns, extensions and garden buildings. Cedar is lighter, more dimensionally stable and has a fine, aromatic grain, which is why it costs more. Thermally modified timber is heated to change its cell structure, improving stability and durability.
Left untreated, all of these will weather to a silver-grey over a year or two, often unevenly at first, with sheltered areas under eaves staying darker. That is entirely normal. If you want to hold the original colour, you will need a UV-protective oil or stain every couple of years, which adds ongoing cost.
Composite cladding
Composite cladding is made from a blend of wood fibre and plastic, often with a hard polymer cap layer that resists fading and staining. It comes in a range of colours and wood-effect finishes and is usually fitted with hidden clips for a clean appearance. It does not rot, split or need painting, and a wash once or twice a year keeps it looking fresh.
The trade-offs are cost, appearance and fire performance. Composite tends to look more uniform than real timber, which some people love and others find artificial. It expands and contracts with temperature, so manufacturers specify expansion gaps that must be followed. Most composite products are combustible, which matters on walls near boundaries and on taller buildings, so check the product's fire classification before choosing it.
Fibre cement cladding
Fibre cement is a mix of cement, cellulose fibres and other materials pressed into planks or panels. It is usually pre-finished in a factory paint, comes in smooth or wood-grain textures and is colour-stable for many years. It will not rot, is not attractive to insects and typically achieves a non-combustible or limited combustibility classification, which is why it is often specified where fire rules are tight.
It is heavier than timber or composite and needs careful cutting with dust extraction, because cutting fibre cement produces fine dust that must be controlled. Corners and edges are finished with matching trims. Fibre cement suits modern homes, extensions and new builds where a crisp painted-board look is wanted without the maintenance of painted timber.
Mixing materials on one building
You do not have to pick just one. Many of the best-looking extensions combine materials: fibre cement or metal on a side wall that sits close to the boundary, with timber on the garden elevation where fire rules are less restrictive and the warmth of wood can be enjoyed. Others use composite on the upper floor, where maintenance access is expensive, and timber at ground level where it is easy to oil or replace a board.
When mixing materials, plan the junctions carefully. Different products move by different amounts with heat and moisture, so where they meet you need a clean trim, a shadow gap or a change of plane rather than butting boards together. Keep the cavity and membrane continuous behind both, and use fixings that suit each product. A specialist can draw these details before ordering so the finished wall looks deliberate rather than patched.
How to choose for your building
Start with any constraints. If the wall is within about a metre of a boundary or the building is tall, fire rules may rule out combustible materials. If you are in a conservation area, planning permission may be needed and the council may favour timber. Then think about appearance and upkeep: are you happy for timber to go grey, or do you want a colour that stays put?
Finally, think about the building itself. A rural barn or garden studio often suits timber. A modern extension in a suburban street may suit fibre cement or composite. A coastal home exposed to salt and wind needs stainless fixings whatever the board, and durable species or non-timber boards perform best there.
- Near a boundary or tall building: consider fibre cement or metal
- Natural look and low cost: larch or Douglas fir
- Premium timber look: western red cedar or thermally modified timber
- Lowest upkeep with consistent colour: composite or fibre cement
- Exposed coastal sites: durable boards with stainless fixings
Questions people also ask
Which cladding lasts the longest?
Fibre cement and good-quality composite generally last longest with the least upkeep, as neither rots. Durable timbers such as cedar, larch and thermally modified wood can also last decades if properly detailed with a ventilated cavity and stainless fixings. Poor installation shortens the life of any material.
Does composite cladding fade?
Capped composite boards are designed to resist fading, though most will lighten slightly in the first months of sun exposure before settling. Uncapped or older composite products can fade and stain more. Check the manufacturer's colour guarantee and follow their cleaning advice to keep boards looking consistent.
Is fibre cement cladding better than timber?
It depends on priorities. Fibre cement is rot-proof, colour-stable and has much better fire performance, so it suits boundary walls and low-maintenance projects. Timber looks more natural, is renewable and is often cheaper. Many projects combine both, using timber for feature areas and fibre cement where fire rules apply.
Written and checked by the Cladding Installation team. Read our editorial policy.
More guides
How Much Does Cladding Cost in the UK? 2026 Prices per m²
Supplied and fitted cladding in the UK typically costs £70–£120 per m² for larch or Douglas fir, £110–£180 for western red cedar, £90–£160 for…
Do You Need Planning Permission for Cladding? UK Rules Explained
In England, cladding a house is often permitted development if the materials are similar in appearance to the existing house. In conservation areas,…
How Is External Cladding Installed? Battens, Membranes and Fixings
External cladding is installed by fixing a breather membrane to the wall or sheathing, then treated battens to create a ventilated cavity, then the…
How to Maintain Timber Cladding: Weathering, Oiling and Repairs
Timber cladding needs little maintenance if left to weather naturally: an annual inspection, keeping vents and the base clear, and replacing any…
Get a free cladding installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote