Torbay · South West
Cladding Installation in Torquay
Homes in Torquay are increasingly finished in larch, cedar and fibre cement. Tell us about your walls and get a local survey arranged.
Where we work around Torquay
We cover all of Torquay and the wider Torbay area. Postcodes we cover here include TQ1 and TQ2. The same team covers Kingskerswell, Shaldon and Marldon too.
Cladding Installation in Torquay: local know-how
The South West mixes stone-built towns, rendered cottages and newer estates, and its western coasts see some of England's wettest, windiest weather. Victorian solid brick walls in Torquay need to breathe, so any cladding must use a vapour-open membrane and a well-ventilated cavity. Exposed seafront walls in Torquay face wind-driven rain and sand, so tight trims and robust membranes matter more than usual.
Pebbledash and dated render on homes around Torquay can be covered with cladding on battens, but the wall must be sound and dry first. Suburban extensions in Torquay frequently combine cladding with large glazing, and installers coordinate trims with window fitters for a clean finish.
What we can do in Torquay
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Typical costs in Torquay
- Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.
- Western red cedar cladding, supplied and fitted: £110–£180 per m². Premium appearance and stability; grade and profile affect the price significantly.
- Larch or Douglas fir cladding, supplied and fitted: £70–£120 per m². Includes membrane, treated battens, stainless fixings and standard trims on accessible walls.
Prices are a guide. Your quote for Torquay is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Torquay
Do you cover cladding repairs in Torquay and Newton Abbot?
Yes, our specialists repair storm-damaged, split or rotten cladding across Torquay, Newton Abbot and the wider area. They check the battens and membrane behind before replacing boards, so the underlying cause is fixed too.
What cladding suits homes near the boundary in Torquay?
For walls within about a metre of a boundary in Torquay, non-combustible options such as fibre cement or metal are usually recommended. Building control at Torbay or a registered building control approver can confirm the requirement for your specific project.
How much does cladding cost in Torquay?
Fitted cladding in Torquay usually costs £70 to £180 per square metre depending on the material, plus scaffolding and removal of any existing finish. Fibre cement and composite sit mid-range, while cedar and standing seam metal cost more. Send photos and rough measurements for an itemised local quote.
Will timber cladding weather in Torquay?
Yes, untreated larch and cedar on homes in Torquay will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
Why has my timber cladding gone black?
Black streaks on timber cladding are usually caused by iron fixings reacting with tannins in the wood, especially in oak, cedar and larch. Plain steel or poor-quality galvanised nails are the main culprit. Patchy dark grey can also be natural weathering or surface mould. Stainless steel fixings prevent the staining, and an oxalic acid cleaner can lighten existing marks.
Can you put cladding over brick?
Yes, cladding can be fitted over sound brick or blockwork. The installer fixes a breather membrane and treated battens to the wall using suitable masonry fixings, then attaches the boards. The wall must be dry and structurally sound first. Window sills and reveals often need extending, because the cladding adds around 50mm to 70mm to the wall thickness.
Helpful guides
Do You Need Planning Permission for Cladding? UK Rules Explained
In England, cladding a house is often permitted development if the materials are similar in appearance to the existing house. In…
Read the guide →Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →Get a free cladding installation quote in Torquay
Tell us what you need and we'll come back with a clear price.
Request a quote