Hampshire · South East
Cladding Installation in Andover
If your old shiplap in Andover has split or rotted, a local specialist can strip it back and re-clad with better materials.
Start your Andover cladding project with a free quote request.
Andover and the surrounding area
Andover is in the Hampshire council area in the South East. Postcodes we cover here include SP10 and SP11. The same team covers East Anton and Picket Piece too.
Working in Andover
Pebbledash and dated render on homes around Andover can be covered with cladding on battens, but the wall must be sound and dry first. Suburban extensions in Andover frequently combine cladding with large glazing, and installers coordinate trims with window fitters for a clean finish.
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Period homes in Andover often have decorative brickwork worth keeping, so cladding is usually limited to rear extensions or later additions.
Our services in Andover
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Guide prices for Andover
- Garden office re-clad (around 3m by 4m): from £1,800. Strip, new membrane and battens, thermally modified timber and trims for a typical small building.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
Prices are a guide. Your quote for Andover is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Andover
Will timber cladding weather in Andover?
Yes, untreated larch and cedar on homes in Andover will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
Is scaffolding needed to clad my house in Andover?
For anything above single-storey height in Andover, yes. Scaffolding is safer and gives installers a stable platform for accurate fixing. Low extensions and garden rooms can often be done from towers or step platforms instead, which saves money.
Which cladding lasts longest in Andover?
Fibre cement and metal cladding generally need the least maintenance on homes in Andover, while correctly installed larch and cedar can also last 30 years or more. The quality of the installation, especially ventilation and fixings, matters more than the material itself.
How much does cladding cost in Andover?
Fitted cladding in Andover usually costs £70 to £180 per square metre depending on the material, plus scaffolding and removal of any existing finish. Fibre cement and composite sit mid-range, while cedar and standing seam metal cost more. Send photos and rough measurements for an itemised local quote.
Is cladding allowed close to a boundary?
Combustible cladding is restricted on walls close to a boundary, typically within one metre, under Approved Document B in England. In these locations installers usually recommend fibre cement or metal cladding with a high fire classification. Building control can confirm the requirement for your project, and the installer should check this before quoting for timber or composite.
Does cladding need a gap behind it?
Yes, nearly all cladding systems need a ventilated cavity behind the boards, usually at least 25mm, created with vertical battens. The gap lets rain that gets past the boards drain away and allows air to dry the back of the cladding. Insect mesh at the top and bottom keeps out wasps and rodents while still letting air flow through.
Helpful guides
How Is External Cladding Installed? Battens, Membranes and Fixings
External cladding is installed by fixing a breather membrane to the wall or sheathing, then treated battens to create a ventilated cavity,…
Read the guide →Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →Get a free cladding installation quote in Andover
Tell us what you need and we'll come back with a clear price.
Request a quote