Kent · South East
Cladding Installation in Herne Bay
Need cladding on a new extension in Herne Bay? Our installers work alongside builders across the South East to finish projects neatly.
Where we work around Herne Bay
Herne Bay falls within Kent, South East. That includes the CT6 postcode districts. The same team covers Greenhill, Herne, Hersden and Hunters Forstal too.
Cladding Installation in Herne Bay: local know-how
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Victorian solid brick walls in Herne Bay need to breathe, so any cladding must use a vapour-open membrane and a well-ventilated cavity. Exposed seafront walls in Herne Bay face wind-driven rain and sand, so tight trims and robust membranes matter more than usual.
Exposed rural sites near Herne Bay take the full force of driving rain, so open-joint designs need careful membrane choice and generous cavities. Rural homes around Herne Bay may be in protected landscapes where cladding needs planning permission, so check before ordering materials.
What we can do in Herne Bay
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Typical costs in Herne Bay
- Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
Prices are a guide. Your quote for Herne Bay is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Herne Bay
Will timber cladding weather in Herne Bay?
Yes, untreated larch and cedar on homes in Herne Bay will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
How much does cladding cost in Herne Bay?
Fitted cladding in Herne Bay usually costs £70 to £180 per square metre depending on the material, plus scaffolding and removal of any existing finish. Fibre cement and composite sit mid-range, while cedar and standing seam metal cost more. Send photos and rough measurements for an itemised local quote.
What cladding suits homes near the boundary in Herne Bay?
For walls within about a metre of a boundary in Herne Bay, non-combustible options such as fibre cement or metal are usually recommended. Building control at Kent or a registered building control approver can confirm the requirement for your specific project.
Do you cover cladding repairs in Herne Bay and Canterbury?
Yes, our specialists repair storm-damaged, split or rotten cladding across Herne Bay, Canterbury and the wider area. They check the battens and membrane behind before replacing boards, so the underlying cause is fixed too.
Do I need planning permission to clad my house?
In England, cladding a house is often permitted development if the materials are similar in appearance to the existing house. In conservation areas, National Parks, Areas of Outstanding Natural Beauty and on listed buildings, cladding normally needs planning permission or listed building consent. Rules differ in Scotland, Wales and Northern Ireland, so check with your council before ordering materials.
Is composite cladding better than timber?
Composite cladding is better if you want minimal maintenance and consistent colour, while timber is better for a natural look and lower environmental impact. Composite does not need oiling and resists rot, but it expands more with heat and is usually combustible. Timber weathers and may need treatment, yet it can be repaired board by board and is often cheaper.
Helpful guides
Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →How to Maintain Timber Cladding: Weathering, Oiling and Repairs
Timber cladding needs little maintenance if left to weather naturally: an annual inspection, keeping vents and the base clear, and…
Read the guide →Get a free cladding installation quote in Herne Bay
Tell us what you need and we'll come back with a clear price.
Request a quote