Cornwall · South West
Cladding Installation in Saltash
Our cladding specialists cover Saltash and nearby Plymouth, fitting ventilated systems that keep walls dry and look sharp for years.
Covering Saltash and nearby
Saltash is in the Cornwall council area in the South West. Jobs here are mostly in the PL12 postcode areas. Nearby places we also cover include Torpoint and St Germans.
What to expect in Saltash
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Post-2000 houses in Saltash are often clad on gable ends or bays, and adding cladding later needs matching trims to integrate neatly.
Exposed rural sites near Saltash take the full force of driving rain, so open-joint designs need careful membrane choice and generous cavities. Rural homes around Saltash may be in protected landscapes where cladding needs planning permission, so check before ordering materials.
Cladding Installation services in Saltash
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Cladding Installation prices in Saltash
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
- Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.
- Western red cedar cladding, supplied and fitted: £110–£180 per m². Premium appearance and stability; grade and profile affect the price significantly.
Prices are a guide. Your quote for Saltash is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Saltash
Can cladding cover pebbledash in Saltash?
Yes, as long as the wall underneath is sound and dry. Installers in Saltash fix battens through the pebbledash into the masonry, leaving a ventilated cavity behind the new boards. Loose or hollow render should be removed first.
Is scaffolding needed to clad my house in Saltash?
For anything above single-storey height in Saltash, yes. Scaffolding is safer and gives installers a stable platform for accurate fixing. Low extensions and garden rooms can often be done from towers or step platforms instead, which saves money.
Do I need planning permission for cladding in Saltash?
It depends on where your home is. Many houses in Saltash can be clad under permitted development, but conservation areas and protected landscapes usually need planning permission from Cornwall. Your installer can flag likely issues, but always confirm with the planning department.
How soon can a cladding installer visit in Saltash?
Surveys in Saltash and nearby Plymouth can often be arranged within a week or two. Installation then depends on material lead times, which typically run one to three weeks, and on the weather.
Is composite cladding better than timber?
Composite cladding is better if you want minimal maintenance and consistent colour, while timber is better for a natural look and lower environmental impact. Composite does not need oiling and resists rot, but it expands more with heat and is usually combustible. Timber weathers and may need treatment, yet it can be repaired board by board and is often cheaper.
Can you put cladding over brick?
Yes, cladding can be fitted over sound brick or blockwork. The installer fixes a breather membrane and treated battens to the wall using suitable masonry fixings, then attaches the boards. The wall must be dry and structurally sound first. Window sills and reveals often need extending, because the cladding adds around 50mm to 70mm to the wall thickness.
Helpful guides
How to Maintain Timber Cladding: Weathering, Oiling and Repairs
Timber cladding needs little maintenance if left to weather naturally: an annual inspection, keeping vents and the base clear, and…
Read the guide →Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →Get a free cladding installation quote in Saltash
Tell us what you need and we'll come back with a clear price.
Request a quote