Leicestershire · East Midlands
Cladding Installation in Shepshed
Need cladding on a new extension in Shepshed? Our installers work alongside builders across the East Midlands to finish projects neatly.
Where we work around Shepshed
We cover all of Shepshed and the wider Leicestershire area. Jobs here are mostly in the LE12 postcode areas. The same team covers Whitwick, Hathern, Sutton Bonington and Thringstone too.
Cladding Installation in Shepshed: local know-how
The East Midlands has a large stock of red-brick terraces and inter-war semis in its cities, with plenty of villages and new estates in between. Victorian solid brick walls in Shepshed need to breathe, so any cladding must use a vapour-open membrane and a well-ventilated cavity.
Access tracks and long carries at country properties near Shepshed can affect delivery and scaffolding costs, so mention them when requesting a quote. Exposed rural sites near Shepshed take the full force of driving rain, so open-joint designs need careful membrane choice and generous cavities.
What we can do in Shepshed
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Typical costs in Shepshed
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
- Garden office re-clad (around 3m by 4m): from £1,800. Strip, new membrane and battens, thermally modified timber and trims for a typical small building.
Prices are a guide. Your quote for Shepshed is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Shepshed
Do I need planning permission for cladding in Shepshed?
It depends on where your home is. Many houses in Shepshed can be clad under permitted development, but conservation areas and protected landscapes usually need planning permission from Leicestershire. Your installer can flag likely issues, but always confirm with the planning department.
How soon can a cladding installer visit in Shepshed?
Surveys in Shepshed and nearby Loughborough can often be arranged within a week or two. Installation then depends on material lead times, which typically run one to three weeks, and on the weather.
Will timber cladding weather in Shepshed?
Yes, untreated larch and cedar on homes in Shepshed will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
How much does cladding cost in Shepshed?
Fitted cladding in Shepshed usually costs £70 to £180 per square metre depending on the material, plus scaffolding and removal of any existing finish. Fibre cement and composite sit mid-range, while cedar and standing seam metal cost more. Send photos and rough measurements for an itemised local quote.
Does cladding need a gap behind it?
Yes, nearly all cladding systems need a ventilated cavity behind the boards, usually at least 25mm, created with vertical battens. The gap lets rain that gets past the boards drain away and allows air to dry the back of the cladding. Insect mesh at the top and bottom keeps out wasps and rodents while still letting air flow through.
Can cladding help with damp walls?
Cladding can protect a wall from driving rain, which helps where damp is caused by water penetrating through porous brick or cracked render. It will not fix rising damp, leaking gutters or condensation, and covering a wet wall can make problems worse. Always find and fix the cause of damp before cladding, and let the wall dry out first.
Helpful guides
Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →How to Maintain Timber Cladding: Weathering, Oiling and Repairs
Timber cladding needs little maintenance if left to weather naturally: an annual inspection, keeping vents and the base clear, and…
Read the guide →Get a free cladding installation quote in Shepshed
Tell us what you need and we'll come back with a clear price.
Request a quote