Stockton-on-Tees · North East
Cladding Installation in Stockton-on-Tees
Need cladding on a new extension in Stockton-on-Tees? Our installers work alongside builders across the North East to finish projects neatly.
Re-clad your Stockton-on-Tees garden room. Get a local quote.
Covering Stockton-on-Tees and nearby
We cover all of Stockton-on-Tees and the wider Stockton-on-Tees area. Jobs here are mostly in the TS19, TS18, TS20, TS21, TS15 and TS22 postcode areas. We also take jobs in Ingleby Barwick and Egglescliffe.
What to expect in Stockton-on-Tees
The North East has a high share of terraced and colliery-era housing, with modern estates growing around its larger towns. Victorian solid brick walls in Stockton-on-Tees need to breathe, so any cladding must use a vapour-open membrane and a well-ventilated cavity.
Pebbledash and dated render on homes around Stockton-on-Tees can be covered with cladding on battens, but the wall must be sound and dry first. Garden offices are popular across suburban Stockton-on-Tees, and many owners re-clad cheap shiplap with thermally modified timber or composite after a few years.
Cladding Installation services in Stockton-on-Tees
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Cladding Installation prices in Stockton-on-Tees
- Garden office re-clad (around 3m by 4m): from £1,800. Strip, new membrane and battens, thermally modified timber and trims for a typical small building.
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
Prices are a guide. Your quote for Stockton-on-Tees is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Stockton-on-Tees
Can cladding cover pebbledash in Stockton-on-Tees?
Yes, as long as the wall underneath is sound and dry. Installers in Stockton-on-Tees fix battens through the pebbledash into the masonry, leaving a ventilated cavity behind the new boards. Loose or hollow render should be removed first.
Is scaffolding needed to clad my house in Stockton-on-Tees?
For anything above single-storey height in Stockton-on-Tees, yes. Scaffolding is safer and gives installers a stable platform for accurate fixing. Low extensions and garden rooms can often be done from towers or step platforms instead, which saves money.
Do I need planning permission for cladding in Stockton-on-Tees?
It depends on where your home is. Many houses in Stockton-on-Tees can be clad under permitted development, but conservation areas and protected landscapes usually need planning permission from Stockton-on-Tees. Your installer can flag likely issues, but always confirm with the planning department.
How soon can a cladding installer visit in Stockton-on-Tees?
Surveys in Stockton-on-Tees and nearby Thornaby-on-Tees can often be arranged within a week or two. Installation then depends on material lead times, which typically run one to three weeks, and on the weather.
Is composite cladding better than timber?
Composite cladding is better if you want minimal maintenance and consistent colour, while timber is better for a natural look and lower environmental impact. Composite does not need oiling and resists rot, but it expands more with heat and is usually combustible. Timber weathers and may need treatment, yet it can be repaired board by board and is often cheaper.
Can you put cladding over brick?
Yes, cladding can be fitted over sound brick or blockwork. The installer fixes a breather membrane and treated battens to the wall using suitable masonry fixings, then attaches the boards. The wall must be dry and structurally sound first. Window sills and reveals often need extending, because the cladding adds around 50mm to 70mm to the wall thickness.
Helpful guides
How Much Does Cladding Cost in the UK? 2026 Prices per m²
Supplied and fitted cladding in the UK typically costs £70–£120 per m² for larch or Douglas fir, £110–£180 for western red cedar, £90–£160…
Read the guide →Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →Get a free cladding installation quote in Stockton-on-Tees
Tell us what you need and we'll come back with a clear price.
Request a quote