Cladding Installation

Guide · Homeowners · 3 min read · Updated 17 November 2026

How Much Does Cladding Cost in the UK? 2026 Prices per m²

Short answer

Supplied and fitted cladding in the UK typically costs £70–£120 per m² for larch or Douglas fir, £110–£180 for western red cedar, £90–£160 for composite, £85–£150 for fibre cement and £180–£320 for standing seam zinc or aluminium. A small garden office re-clad starts from about £1,800. Scaffolding, removing old cladding, insulation and complex detailing around windows add to the total.

How Much Does Cladding Cost in the UK? 2026 Prices per m²

Cladding prices by material

Cladding is almost always priced per square metre of wall, measured flat, with window and door openings deducted or allowed for in the trim work. The rate covers the boards, the breather membrane behind them, treated battens to form a ventilated cavity, stainless steel fixings and standard corner and edge trims. It assumes walls that can be reached from the ground or a simple tower.

The spread within each material comes from board grade, profile and fixing method. Knotty larch in a simple feather edge profile sits at the bottom of its range, while clear-grade cedar in a tongue and groove profile sits at the top. Composite boards with hidden clip fixings cost more than face-fixed ones, and large-format fibre cement panels on aluminium rails cost more than overlapping planks.

MaterialSupplied and fittedNotes
Larch or Douglas fir£70–£120 per m²Weathers to silver-grey, good value
Western red cedar£110–£180 per m²Stable, light, premium appearance
Composite£90–£160 per m²No painting or oiling, colour-fast
Fibre cement planks£85–£150 per m²Pre-finished, rot-proof, low combustibility
Standing seam zinc or aluminium£180–£320 per m²Specialist folding and detailing
Garden office re-clad, about 3m by 4mfrom £1,800Strip, new membrane, battens and boards

What a typical project costs in total

Per square metre rates are useful, but most people want to know the total. A single-storey rear extension with around 25 m² of cladding in larch might come to £1,750–£3,000 for the cladding itself. Cladding the upper floor of a two-storey house, typically 40–60 m² across the elevations, could run from £2,800 in larch to well over £10,000 in cedar or composite, before scaffolding.

A garden office or studio is often the easiest project to budget. A 3m by 4m building has roughly 35 m² of wall, and a re-clad with new membrane, battens and thermally modified timber starts from about £1,800. Metal cladding is usually reserved for feature walls or contemporary extensions because of its higher rate and the specialist skills needed to fold and fix it properly.

Factors that push the price up

Access is the first. Anything above single-storey height normally needs scaffolding, which is priced separately and depends on the length of each elevation, the ground conditions and how long it stays up. Tight side passages, conservatories in the way and sloping gardens all add to scaffold costs.

The second is what is already on the wall. Removing old cladding, tiles or render takes time and generates waste that must be carried away by a registered waste carrier. If the timber frame or sheathing underneath has rotted, it needs repairing before new cladding goes on. Detailing is the third factor: every window, door, corner, soffit and pipe needs trims, flashings and careful cutting, so a wall with lots of openings costs more per square metre than a plain gable.

  • Scaffolding for anything above ground floor
  • Stripping and disposing of existing cladding
  • Repairs to sheathing, frame or masonry behind
  • Number of windows, doors and corners to detail
  • Adding insulation behind the cladding
  • Hidden fixings or bespoke profiles

Running costs over the life of the cladding

The cheapest cladding to install is not always the cheapest to own. Untreated larch and cedar left to weather naturally need very little maintenance, but if you want to keep the original honey colour you will need to apply a UV-protective oil or stain every couple of years, which adds labour and scaffold costs on taller walls.

Composite and fibre cement cost more to install but generally need only an occasional wash. Painted softwood is the most demanding option, needing redecoration every few years. When comparing materials, think about how long you plan to stay, how high the walls are and how much you are willing to spend on upkeep. On a two-storey elevation, avoiding one scaffold for maintenance can offset much of the difference in upfront cost.

Ways to save money without cutting corners

Choose a profile and board width that suit standard stock lengths, which reduces offcuts and waste. Let timber weather naturally rather than committing to regular coatings. Combine cladding with other work that needs scaffolding, such as fascia and gutter replacement or window installation, so you only pay for the scaffold once.

Do not save money on the hidden parts. A cheap membrane, untreated battens or plated fixings that rust will undermine even the best boards. Stainless steel fixings are essential for cedar and oak, which react with ordinary steel and stain black. Ventilation gaps at the top and bottom of the cavity, with insect mesh, are what keep the battens dry and the cladding lasting.

Getting an accurate quote

To get a firm price, send photos of each elevation, rough measurements, the material you are considering and what is on the walls now. Mention whether the building is in a conservation area or close to a boundary, as that can affect what materials are allowed. A site visit is normal for anything beyond a small outbuilding.

We arrange quotes from vetted, insured local cladding specialists who can measure, advise on the right material for your building and give you one clear supplied-and-fitted price.

Questions people also ask

What is the cheapest type of cladding in the UK?

Larch or Douglas fir timber is usually the cheapest quality option, at around £70–£120 per m² supplied and fitted. Feather edge softwood can be cheaper still for sheds and outbuildings, but it needs treatment and is less durable. Composite and fibre cement cost more upfront but need less maintenance over their life.

How much does it cost to clad a garden room?

Re-cladding a typical 3m by 4m garden office starts from about £1,800, including stripping old boards, new breather membrane and battens, thermally modified timber and trims. Larger buildings, premium cedar or composite, and repairs to the frame underneath all increase the price.

Does cladding price include scaffolding?

Usually not. Per square metre cladding rates assume walls reachable from the ground or a simple tower. Scaffolding for upper floors is normally priced separately and depends on elevation length, height, ground conditions and how long it is needed. Ask each quote to show scaffolding as its own line.

Written and checked by the Cladding Installation team. Read our editorial policy.

Get a free cladding installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote