Surrey · South East
Cladding Installation in Sunbury-on-Thames
If your old shiplap in Sunbury-on-Thames has split or rotted, a local specialist can strip it back and re-clad with better materials.
Get cladding quotes from installers covering Sunbury-on-Thames.
Where we work around Sunbury-on-Thames
Sunbury-on-Thames is in the Surrey council area in the South East. That includes the TW16 postcode districts. The same team covers Twickenham, Staines-upon-Thames, Weybridge, Esher and Hersham too.
Cladding Installation in Sunbury-on-Thames: local know-how
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. Modern timber-frame homes in Sunbury-on-Thames already have a cavity and breather membrane, which installers must protect when fixing new cladding.
Access tracks and long carries at country properties near Sunbury-on-Thames can affect delivery and scaffolding costs, so mention them when requesting a quote. Exposed rural sites near Sunbury-on-Thames take the full force of driving rain, so open-joint designs need careful membrane choice and generous cavities.
What we can do in Sunbury-on-Thames
Cladding Repair and Replacement
Replacing split, rotten or storm-damaged boards, fixing failed membranes and correcting badly installed cladding.
Timber Cladding
Larch, cedar, Douglas fir or thermally modified boards fitted as shiplap, feather edge, tongue and groove or open-joint rainscreen.
Composite Cladding
Low-maintenance wood-plastic or capped composite boards that hold their colour and never need painting or oiling.
Fibre Cement Cladding
Pre-finished fibre cement planks or panels that are non-combustible or limited combustibility, rot-proof and colour-stable.
Metal Cladding
Standing seam zinc, aluminium or steel cladding for striking modern homes, extensions and commercial buildings.
Garden Room and Outbuilding Cladding
Re-cladding or new cladding for garden offices, studios, sheds, garages and stables, with matching trims and fascias.
Typical costs in Sunbury-on-Thames
- Standing seam zinc or aluminium: £180–£320 per m². Specialist folding and fixing work; includes sheathing or rails and flashings.
- Fibre cement planks, supplied and fitted: £85–£150 per m². Pre-finished colours; large-format panels on rail systems cost more.
- Composite cladding, supplied and fitted: £90–£160 per m². Capped boards with hidden clip systems sit at the upper end of this range.
Prices are a guide. Your quote for Sunbury-on-Thames is a fixed price based on the details you give us. Full price guide.
Cladding Installation questions from Sunbury-on-Thames
Will timber cladding weather in Sunbury-on-Thames?
Yes, untreated larch and cedar on homes in Sunbury-on-Thames will turn silver grey over one to two years, faster on south and west elevations. If you prefer to keep the original colour, a UV-protective oil can be applied and refreshed every few years.
How much does cladding cost in Sunbury-on-Thames?
Fitted cladding in Sunbury-on-Thames usually costs £70 to £180 per square metre depending on the material, plus scaffolding and removal of any existing finish. Fibre cement and composite sit mid-range, while cedar and standing seam metal cost more. Send photos and rough measurements for an itemised local quote.
What cladding suits homes near the boundary in Sunbury-on-Thames?
For walls within about a metre of a boundary in Sunbury-on-Thames, non-combustible options such as fibre cement or metal are usually recommended. Building control at Surrey or a registered building control approver can confirm the requirement for your specific project.
Do you cover cladding repairs in Sunbury-on-Thames and West Molesey?
Yes, our specialists repair storm-damaged, split or rotten cladding across Sunbury-on-Thames, West Molesey and the wider area. They check the battens and membrane behind before replacing boards, so the underlying cause is fixed too.
Does timber cladding need treating?
Durable species such as larch, cedar and thermally modified timber do not need treating to resist rot if correctly installed. Left untreated, they weather to a silver grey within one to two years. If you want to keep the original warm colour, apply a UV-protective oil or stain and recoat every two to five years depending on exposure.
How long does it take to clad a house?
Cladding a single-storey extension usually takes two to four days, while a full two-storey detached house can take one to three weeks. Time depends on the wall area, scaffolding, the number of windows and corners, and whether existing render or cladding must be removed first. Weather can also cause delays, since membranes should not be left exposed for long.
Helpful guides
How Is External Cladding Installed? Battens, Membranes and Fixings
External cladding is installed by fixing a breather membrane to the wall or sheathing, then treated battens to create a ventilated cavity,…
Read the guide →Timber vs Composite vs Fibre Cement Cladding: Which Is Best?
Timber cladding gives the most natural look and is often cheapest, but it weathers and may need oiling to keep its colour. Composite holds…
Read the guide →Get a free cladding installation quote in Sunbury-on-Thames
Tell us what you need and we'll come back with a clear price.
Request a quote